Truck
#____________________
A circle check is to be completed and recorded, when the Electric Tugger/Tow Tractor is used for the first time on a shift.
Physical Checks include looking for:
- signs of battery leaks, cable damage -low water levels (dry moss shield once a week).
- recent dints or gouges. - damaged wheels or material caught in wheels.
Mechanical Checks include:
- listening unusual noises with power on - check that the horn is working.
- proving that the up, down, forward and back controls are operate and return to neutral..
- proving that the brake works - lower position (pressed down) - upper position. (released)
- checking that plugging (changing the direction controls) acts as a brake
- making pallet truck move forward by pushing bumper button.
- proving that the coupler is operating properly
- checking for signs of slow oil leaks if parked for a long period
If there are no reasons for concern write your initials besides today’s date on the reverse side and return this check sheet to its proper place.
If there are concerns, write them in the space below and contact your supervisor. The supervisor will decide the action required and record it beside your comments.
Date Concerns Operator’s Initials
Action to be taken. Supervisor’s Initials
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
created by LTS visit www.safetycoach.ca for details about material handling training
At
least once a month the supervisor demonstrates due diligence by asking a
worker to complete an extra checks with the supervisor present and then adds
his/her initial besides the worker's.
|
date |
month
of ______________________ shift
1st
2nd
3rd |
|
date |
year 200 ___ shift
1st
2nd
3rd |
||||
|
1 |
|
|
|
16 |
|
|
|
|
|
2 |
|
|
|
17 |
|
|
|
|
|
3 |
|
|
|
18 |
|
|
|
|
|
4 |
|
|
|
19 |
|
|
|
|
|
5 |
|
|
|
20 |
|
|
|
|
|
6 |
|
|
|
21 |
|
|
|
|
|
7 |
|
|
|
22 |
|
|
|
|
|
8 |
|
|
|
23 |
|
|
|
|
|
9 |
|
|
|
24 |
|
|
|
|
|
10 |
|
|
|
25 |
|
|
|
|
|
11 |
|
|
|
26 |
|
|
|
|
|
12 |
|
|
|
27 |
|
|
|
|
|
13 |
|
|
|
28 |
|
|
|
|
|
14 |
|
|
|
29 |
|
|
|
|
|
15 |
|
|
|
30 |
|
|
|
|
|
|
|
|
|
31 |
|
|
|
|
At
the end of each month the completed sheets should be filed for a period of at
least one year.
Potential
Uses
Trend analysis by the
committee members
Mechanical history of the equipment
Demonstrate "due
diligence" to the MOL
Reference sheet for the mechanic
visit www.safetycoach.ca for details about material handling training
created by and
copyright of LTS (Laing Training
Systems)